B0110-04202SK windshield

How to remove the windshield film?

1.Locate the opening in the rubber strip.
2.Peel back a small section of the rubber strip.
3.Tear away the film at the edge of the windshield.
4.Reinstall the rubber strip back in place.
Here is a video for your reference.

Does the windshield require drilling for installation?

No drilling required. The pre-drilled holes perfectly align with your UTV. All necessary hardware and the installation manual are included in the package, ensuring a quick and easy setup

What if the included rubber seal is larger than the windshield?

This is normal. The adhesive strip for this product is included separately and you need to cut it after installation to ensure it matches.

How to Choose Cleaning Tools?

Use a microfiber or non-woven cloth to avoid scratches and a neutral cleaner like water or a specialized PC cleaner. Do not use cleaners with corrosive chemical ingredients like alcohol, acetone, or gasoline to prevent swelling or discoloration.

How to Clean PC Windshield?

1. Use a dry cloth to remove dust.
2. Wipe the surface gently with a dampened cleaning cloth. For stubborn stains, briefly soak the affected area.
3. Immediately dry the surface with a dry cloth to prevent water residue.

Could it work with factory snorkels?

No, it doesn’t work for SxS with factory snorkels.

How to clean mud on the windshield?

Please refer to the video below.

How to clean dust on the windshield?