Midnight Series-70 Gen2 & 80 Gen2 (B1801-00102-BK70 & B1801-00102-BK80)

Functions&Usage

What is the specification for the fuse?

15A.

Does the soundbar have aux in and out port?

Yes, the soundbar has AUX IN and OUT port.

Is there USB port for playing?

Yes, you could insert USB disk for playing music.

What is the Bluetooth name for connection?

As to B1801-00102-BK70, the name is Midnight 70Gen2. As to B1801-00102-BK80, the name is Midnight 80Gen2.

Does the soundbar have setting memory function?

Yes. The lighting effects/EQ/volume settings can be remembered before shutdown and will be the last setting after restarting.

Could the USB port be used for output?

Yes, the USB port could provide DC 5V 2A power.

What voltage could be connected to the soundbar for usage?

The soundbar is compatible with 12-18V.

Does it support broadcast function? Could connect with multiple soundbar for playing?

Yes. The broadcast function(Auracast) can only be enabled in Bluetooth mode. The main unit connects to the phone via Bluetooth, and the secondary unit simultaneously enables the broadcast function in Bluetooth mode, allowing interconnection between two or more units. Seamlessly connect 100 soundbars for multi-vehicle music sharing (this feature only supports connecting to multiple broadcast-enabled soundbars).

Could the soundbar be turned on through the remote control?

The remote control can only turn the soundbar off, not on. Turning the soundbar on requires manually pressing the on/off button on the control panel.

Does it support FM function?

No.

What APP is used for control?

App name is KEMIMOTO. You could scan the code for downloading APP.

What are the functions of each button on the remote controller?

See below photo.

Can it be connected to a 48V golf cart for usage?

The soundbar should be connected to 10-18V for usage. If you golf cart is 48V, then you need to add a step-down voltage converter to convert the voltage of your golf cart into 12V for usage.

How to control the audio system through the KEMIMOTO APP?

You can download the KEMIMOTO APP on your mobile phone. After connecting the audio equipment, you can conveniently control playback, switch lighting effects, select EQ modes, adjust volume, etc. through the APP. For detailed instructions, please refer to the operation guide video on the product page.

What are the precautions for the waterproofing, cleaning and daily use of the product?

The item is IP66 waterproof rating, which can prevent strong water splashes, but it is not recommended to immerse it in water for a long time.

Cleaning Instructions:
Avoid using a high-pressure water gun to directly rinse the speaker cone and the inner part of the front metal mesh, as this may cause the cone to crack or get waterlogged.

If the sand accumulates inside the front grille, it is recommended to detach and clean the grill regularly. Be sure to prevent the screws from rusting.

Usage Note:
To prevent audio distortion caused by unstable voltage during the vehicle’s startup, it is recommended to start the vehicle engine first and then turn on the audio system.

I think the volume of the sound system is not loud enough. What's the reason for that?

There are multiple factors that will influence the effects.

1.Installation location: The position and orientation of the audio system have a significant impact on the listening experience. It is recommended to install it near the ears of the passengers (within 1 meter), and avoid being obstructed by the engine or other structures.

2.Wind noise impact: At high speeds (such as 60 mph), wind noise will cancel out some of the sound, especially the low frequencies. If the vehicle is equipped with a windshield, the sound quality will be clearer. High-frequency music is relatively easier to hear at high speeds.

3.Voltage issue: Please confirm again that the power supply voltage is stable at 12V or above.

What should I do if the audio equipment fails to turn on (or shuts off automatically)?

1.Check the power supply: Confirm whether the battery voltage is within the range of 10-18V and whether the fuse has blown.

2.Check the connection: Ensure that the positive and negative terminals of the power cord are correctly and firmly connected, without any looseness or detachment.

3.Protection Trigger: If the power is reversed or the voltage is lower than 10V or higher than 18V, the protection circuit of the audio equipment will activate, preventing the device from starting. Please ensure the polarity is connected properly and the voltage is normal.

What connection methods and audio sources are supported by the audio system?

Wireless input: AUX IN (3.5mm), USB interface (supports playback of up to 64GB USB drives).

Audio output: AUX OUT (3.5mm), which can be connected to an additional amplifier or an active subwoofer.

Broadcast function: By pressing the dedicated button, you can enter the Auracast broadcast mode, which allows you to control or connect with other devices.

USB charging: The USB port can charge external devices such as mobile phones (5V/2A).

Will the soundbar automatically turn off to avoid power consumption if it is always on?

Yes, if the soundbar is not playing music, it will automatically shuts down after 10 minutes of standby.

Does the product come with a battery?

No, Midnight Gen2 series soundbar does not include a battery.

Can I still hear the music clearly at 60 mph?

It depends on the type of music you’re listening to. If the music has more high frequencies, it will be clearer. However, our soundbar delivers superior high-frequency performance compared to other models on the market. Sound effect will be better if your vehicle has installed windshield and the soundbar is installed at around 1m near where you are sitting.

Can I use the Kemimoto APP to play my Apple Music playlists?

You can use the Kemimoto APP to play music stored locally on your phone. If you’re looking to play songs directly from your phone’s native music player, like Apple Music, you might need to subscribe to those services or pay for the necessary media rights.

Could I add a subwoofer to it and how this could be done?

Yes, you could. Our speakers of Midnight series and B0117-03015-BK have aux-out output function, which can be connected to your device’s aux-in interface via an audio cable.

Why did my audio system shut down automatically after ten minutes?

To save battery power, our audio system will automatically shut down after ten minutes without any signal input.

Trouble-shooting

How to pair with the remote controller? The remote controller is not working.

Please follow the steps in the video for operation. If it does not work, please further check whether the battery of the remote controller is loosening. You could replace with new battery for a try.