B0502-00001-BK UTV Fan, Dual 8" Large Cab Cooling Fan 5 Wind Speeds
Could this fit CFMOTO Zforce?
No, this will not fit CFMOTO Zforce. Our fans fit UTV with 41.5″ to 57″ width roof. Please make sure your roof width is between 41.5 inches and 57 inches. The cooler fan is tested to be compatible with Polaris RZR 2024+, Polaris Ranger, Can-Am Defender, CFMOTO Uforce… For some utv like X3, whose dome could be too low to have a great using experience.
Could this work with golf cart?
No, it is not compatible with golf carts.
Could the wind speed be adjusted?
Yes, the fans support 5 wind speeds.
Can it be used without starting the vehicle? If yes, how long can it last?
We don’t recommend using it with the vehicle engine off. Its runtime depends on the battery condition.
How to install KEMIMOTO utv roof fan?
My fan doesn't turn on after installation. What should I do?
Please follow these troubleshooting steps:
① Confirm you are using a 12V DC power source and that the positive/negative terminals are correctly connected;
② Check if the fuse is blown;
③ Inspect cables for damage or loose connections;
④ Verify power is reaching the control box.
If all checks pass but the fan still doesn’t work, please send us a short video showing the issue for further assistance.
My fan is making loud noises/strange sounds. Is this normal?
Some wind noise and motor sound at high speeds are normal. However, if you hear high-pitched squealing, grinding, or clicking sounds, there may be an issue. Please: ① Check if fan blades are contacting the shroud; ② Check for foreign objects (e.g., zip ties, wires) caught inside the fan; ③ Ensure mounting bolts are not over-tightened or too loose. If the issue persists, please send us a video for diagnosis.
The mounting brackets/clamps don't fit my roll cage. What should I do?
The product includes both 40mm and 52mm hinged hose clamps. Please select the clamp that matches your roll cage tube diameter. If neither fits, please provide: ① A photo showing the tube diameter measurement; ② Clear photos of the mounting area. We will evaluate whether alternative clamps need to be sent.