There is a hidden spare zipper head on driver side(front door only). If the original zipper head cannot work, you can release the spare zipper head to continue using.

(For SKU: B0110-15647-BK B0102-03909-BK B0110-15638-BK B0110-15620-BK B0110-15615-BK B0102-03902-BK B0110-10502BK B0110-10602BK B0110-09602BK B0110-09402BK B0110-14401BK B0102-03701BK B0110-10302BK B0110-09702BK B0110-13701BK B0110-13201BK B0102-03401BK B0110-13001BK B0110-15655-BK B0127-00002-BK B0127-00001-BK B0127-00007-BK B0127-00006-BK B0127-00003-BK B0127-00004-BK B0127-00005-BK B0127-00009-BK B0127-00012-BK B0127-00013-BK B0127-00014-BK B0127-00015-BK)

Here are the steps for operation to use the back-up zipper puller:
1.Spare zipper head hidden at the end of the zipper.
2.Separate the zipper teeth and use autility knife to cut the thread from the middle.The stitching needs to be removed and clean. Be careful not to damage the zipper teeth.
3.Detach the puller from the broken zipper head and attach it to the spare one for continued use.
See the attached photo.
This repair method is suitable for broken or detached zipper head, but not for damaged zipper teeth. lf you have any questions, please contact us directly.

All products are brand new. Packaging might have minor deformation due to long-distance shipping but should not be aseverely damaged. The product might have stitching issues but should not have fabric abrasion, cracks, or broken zippers. Please contact us and send photos to show the package and item status so that we could come up with further help and solution.

Yes—under 30 mph with all straps tight. For highway towing, remove or cover the upper doors to prevent wind damage.

High-speed towing without a cover may tear straps or panels.

Wipe PVC with a soft damp cloth—never dry rub. Roll for storage. Don’t fold.

Clean with soap + brush. Dry, then lube with zipper wax. Never force a stuck zipper—clean grit, reapply lube, then retry.

Just switch the strap to the built-in adhesive tape. No drilling, full seal.

Pair with a roof and windshield for best insulation. Avoid open setups—strong wind may damage straps and decals.

We recommend rolling up the transparent film when you drive at this speed. However, if the film is not rolled up, it is advisable not to drive too fast as the straps may break.

Spread out the soft cover under direct sunlight for a day or two to resolve this issue. You can also use a hairdryer to speed up the process (time depends on the size of the transparent film, usually within 15-60 mins), but do not keep the dryer in one spot for too long as PVC film may melt and deform due to high temperature. (PS: Minor wrinkles in the transparent film are due to the material itself; significant wrinkles are caused by rough packing by warehouse. Blue moisture occurs when the PVC film gets damp, usually due to improper storage of raw materials or prolonged sea transportation.) If any further issues, you could send us some photos for showing the problem.

Zipper Repair Instruction Video

If wrinkles appear, use a hairdryer to heat and smooth them out. You can appropriately increase the wind strength and heat.
Please refer to the instruction video below.

Loosen the front windshield screws. Stick the upper door to the roll bar. If the roof is already installed, loosen the these screws to let the strap pass through. If the rear windshield is installed, loosen these screws to let the strap pass through. Please refer to the instruction video below.

You could easily zipper down from the window area, and then the soft doors or cab enclosure could be opened to let you further open the vehicle door. Please refer to the instruction video below.

We recommends a minimum usage temperature of -15℃ for the transparent film. If you use the item in environments below -15℃ for an extended period, the transparent film may crack. Please further contact us and send some photos to show the issue.

If the strap stitching tears during installation, it is likely due to weak stitching, please contact us and send some photos to show the issue.

This could be due to improper usage, such as not using the front windshield+ roof + rear windshield together, towing at high speeds, or not smoothing out the surface during installation to eliminate gaps. These situations can cause excessive wind force on the straps, leading to tearing, please contact us and send some photos to show the issue.

Towing on highways is not recommended. If towing is necessary, covering the vehicle with a cover can reduce the risk of damage to the product, but it cannot completely prevent it. We recommend a maximum towing speed of 40 mph.
Prolonged exposure to high-speed movement can cause the straps to break or fall off due to excessive wind force. If the product encounters sharp objects at high speeds on the road, the fabric may get torn or cracked.

Please contact us and send some photos to show the package and all the parts you received. We will help check the issue and come up with solution.

This is due to errors during production or packaging at the factory. Please contact us and send some photos to show the package and all the parts you received. We will help check the issue and come up with solution.

The strap at the connecting part between the soft upper doors and the front windshield is detachable. If there is a conflict, you can remove the strap and use the nearby Velcro adhesive tape to fix it.
This is a special design feature. The strap fixed on the A-bar is designed to be detachable to ensure compatibility with most brands of front windshields on the market.

If the roof/rear windshield of your vehicle is not original, it may indeed be incompatible with our product.
The strap positions of our soft upper doors are designed to avoid original roofs and rear windshields.

First, loosen the fixing clamps of the front windshield/roof/rear windshield. After installing the soft upper doors, reinstall the clamps to their original positions.
The clamps of front windshield/roof/rear windshield press against the vehicle frame, preventing the straps of our soft upper doors from passing through and being fixed. Therefore, the clamps need to be loosened first, allowing the straps to be secured before reinstall the clamps.

If the front windshield/roof/rear windshield of your vehicle is original, our soft upper doors will definitely be compatible. If not, please check our installation photos to judge compatibility, mainly by checking whether the clamp positions conflict with the strap positions.
The strap positions of our soft upper doors are designed to avoid original front windshields, roofs, and rear windshields. Since we do not know the exact clamp installation positions of the front windshield/roof/rear windshield on your vehicle, you need to make the judgment by yourself.

1) For optimal performance, the Soft Doors or Cab Enclosure is designed to be used in conjunction with the vehicle roof and front/rear windshields to create a relatively sealed and warm environment. It is not advisable to use this product in an open setting as strong winds could potentially cause damage to the straps, hook-and-loop tapes, and body decals.
2) For an easy action, loosen the fixation clamps of your vehicle roof, front/rear windshield before starting installation.
3) Use denatured alcohol and clean any area where the product will be installed.
4) Should you notice whiteness, cloudiness, wrinkles, or ripples on the Soft Doors or Cab Enclosures, be aware that these imperfections usually resolve after exposure to sunlight and/or heat. To expedite this process, gently warm the affected areas using a heat gun or hair dryer. Caution: Do not overheat, and avoid concentrating heat on one area for too long to prevent damage to the Soft Panel.

By following these precautions before installation to ensure a successful setup and maintain the integrity of the UTV Soft Doors or Cab Enclosures.

1) For an easy action, loosen the fixation clamps of your vehicle roof and side door panel before starting installation.
2) Use denatured alcohol and clean any area where the product will be installed.
3) Should you notice whiteness, cloudiness, wrinkles, or ripples on the soft rear windshield, be aware that these imperfections usually resolve after exposure to sunlight and/or heat. To expedite this process, gently warm the affected areas using a heat gun or hair dryer. Caution: Do not overheat, and avoid concentrating heat on one area for too long to prevent damage to the soft rear windshield.

What should I do if the zipper is damaged?

Please confirm the following details to help us better understand and resolve your issue:
1. Is the zipper on the left side or the right side damaged?
2. Please check if the teeth of the zipper are damaged.
3. Could you please provide us with a few photos showing the damage to the zippers? Additionally, please include your order number in the email and send it to our customer support email address.

2024 polaris rzr 1000 xp4 ultimate it comes with ride command system and rockford fosgate sound system, the rear speaker bracket now protrudes, making it impossible to secure the soft windshield.

While the Ultimate model is compatible in terms of vehicle fitment, it is not compatible with the rear speaker pod brackets. The rear speaker brackets protrude, making it impossible to properly secure the adhesive. If you wish to retain our rear windshield, you will need to remove the speaker pod. On the other hand, if you want to keep the speaker pod, you will need to purchase the OEM PC rear windshield.

Why will this not work with the poly roof also i have the flip up windshield will it not work with it also?

This product is not compatible with the Poly Sport Roof or Audio Roof. Additionally, it will not work with front fold windshields that have thick clamps.
However, it is compatible with most front full windshields and glass windshields. It also fits well with aluminum roofs or the KEMIMOTO Soft Roof.

How does it do with keeping the dust from gravel roads from swirling in? I have been debating on getting just metal half doors to try and cut down the dust swirl but looking at these I just worry the dust will swirl in from the bottom.

The KEMIMOTO full doors are made of waterproof PVC fabric and high-definition transparent film, and the sturdy and durable kemimoto soft cab enclosure provides excellent weather protection. Our soft full windshield can effectively prevent rainwater, snow, sand, dust, leaves, and other debris from entering the UTV, keeping the cab clean and tidy, and ensuring maximum driving comfort.

My vehicle model is compatible, but the straps are too short to install.

Please check whether other things are installed in this position, causing the straps of rear windshield to be not long enough for installation. We recommend you to remove the obstructions before installing our rear windshield.

The velcro on bottom starts to peel away like it’s too tight if a fit, but if I loosen the front straps I believe it will let a lot of wind in. I installed them on 2024 krx trail edition.

For the Velcro issue at the bottom, we suggest the following steps:
1. Clean the door thoroughly to remove any water or other impurities.
2. Reattach the Velcro to ensure it adheres properly.
If you find that additional Velcro is needed, you can purchase 1.5-inch wide adhesive Velcro strips, which are available on Amazon. This should help secure the fit without compromising on wind protection.

What are the dimensions of this product and what material is it made from?

This is a custom-fit product, and we do not provide specific dimensions. You can purchase it based on the compatible vehicle models listed on the product page.The material used is PVC fabric.

1.Will these doors work if have windshield and rear window installed? 

The product is compatible with both front and rear windshields.

2.What type of material these doors are made of. Is it 900D?

The material is PVC coated cloth, better water-proof, tear-resistant and fade-resistant than 1680D Oxford cloth.

1.Can you open the door without unzipping the window?

This design features a small window, allowing you to reach in and open the door directly. There is no need to unzip like regular upper doors before opening.

2.Will it fit with an audio roof?

No. Our upper doors fit with aluminum roofs or KEMIMOTO soft roofs, does not work with poly sport roof, Plastic roof, and audio roof options. Not compatible with doors that have soundbars. If you need to use it, you can remove the door soundbar. Not compatible with the flip-up windshield with thick clamps.

3.Could it fit with mirrors?

Yes. Our soft cab enclosure features distinctive mirror cutouts, allowing easy installation without removing the mirrors. The slots are wide enough for most UTV side mirrors and do not obstruct rearview visibility.

1.Does this product include all four doors?

The product you inquired about comes with a pair of soft doors (on the left and right), and the installation covers four doors.

2.Does it come with mounting hardware?

The product is installed using self-adhesive tape and straps, which are included in the product. No extra mounting hardware is needed.

3.Could it fit with mirrors or windshield?

Yes, it fit with mirrors or windshield. Our soft doors have strap-on design and the mirror flap openings for compatibility with mirrors and windshield.

1.How do you open and close the door?

To open or close the door, please follow these instructions:
Getting On and Off: Simply unzip the zipper to open and close the door as needed.

1.The front and rear glass cannot be properly sealed. It seems incompatible with the windshield and rear window, preventing a proper seal. What should I do??

To ensure proper installation and sealing when using it, first remove both the front and rear windshields. Install the soft top as directed in the manual, then reinstall the windshields. Please note that the straps of the soft top have a certain thickness, causing a slight elevation of about 2-3mm at the contact points where the straps meet the glass. This minor adjustment is expected and should not affect overall functionality.

2.Could it work with roof?

Designed with removable straps and mirror holes, they are compatible with roofs, windshields, and lower doors, so nothing is stopping you from going for a total cab enclosure.

1.Is the bottom half metal and top fabric?

The product is composed of the steel frames and fabric doors. The fabric doors will cover on the steel frames, so the steel frames are inside while fabric doors outside.

2.Is this just the front doors or is it all 4 doors front and back?

The product includes a total of 4 doors, that is 2 front and 2 rear doors.

1.Can you just give me the actual dimensions of the covering?

The product dimensions are 62.2 inches x 32.2 inches.
We recommend that you check the vehicle model to confirm compatibility before the purchase.

1.Does it roll up to stow away?

The side door can be rolled to the side as shown in the below photo.

1.Will side straps interfere with door seal when closed？?

If your vehicle has lower half doors, the side strips will not affect the sealing. If full doors, the side straps thickness is 2-3mm, which may affect the sealing of the full doors.

2.What’s the exact measurements of the whole rear windshield completely? The full the length and full width.

About 57inch length x 25inch width.

3.Could it work with roof?

For compatibility with the original plastic roof, modifications such as drilling holes for roof screws might be necessary. You will need to create 4 holes using a soldering iron for the screws that secure the roof to pass through.

1.The top it’s flush and at the bottom it’s sticking out and on the side that’s sticking out. How can this be resolved?

In this situation, please install the door lock latch as much toward the inside of the vehicle as possible to minimize the issue with the door panel protrusion.
You can also try manually bending it inward to correct the door frame.

2.Can doors be left on when towing?

We are sorry that we do not suggest towing on highways with the product installed on the vehicle. You can cover it with a cover before towing if the towing is unavoidable.

1.Can it be used with a full flip-up windshield and rear window??

Yes, our soft doors could work with front and rear windshields.

2.Could it work with mirrors??

Yes, there is opening on the soft doors for usage with mirrors.

What are the Dimensions?

Product dimension is 40.16in x 32.68in.

What is the overall size width and height where it stripes on?

The overall size is 25.59 inches in width and 53.14 inches in length. For further reference, please feel free to check the attached image for more details.

The product was fixed by straps and Velcro. If you find that the hook and loop fastener at the bottom of the windshield is not glued firmly, you can punch a hole in the plastic panel of the body and fix it with a plastic expansion buckle.