Welcome to the Kemimoto Help Center
Are these units pre loaded or is this just the speaker pods?
The product is not a speaker enclosure but rather a sound bar for UTV vehicles. It includes several components such as speakers, brackets, a remote control, and a control panel. Some parts come pre-assembled, while others require you to assemble and complete the final installation.
When the AUX port option is selected for playback, can I play via a USB connected phone?
No, the USB cannot be directly connected to the mobile phone. The USB port can only be used to read and play the USB flash drive.
How many watts total?
100 watts RMS.
Are the speakers interchangeable to put better quality speakers in. Are they compatible with any other speaker to be synced?
The speaker could be interchan-geable. You could use the audio cable to make the speaker compatible with other speakers(our speaker only has aux in port).
Is there a way to run another set of these together?
No, you could not run another set of these together.
How do these speakers get power? Batteries or do you have to run wires to them?
These could only be powered through the power cables included.
I bought two same speakers. What if I could output music from a mobile phone or MP3 player or other audio device with a 3.5mm interface to both speakers so that the 2 speakers can play music at the same time?
Method: Using an AUX Splitter
What You’ll Need:
A 3.5mm AUX splitter (also called a “1-to-2 audio splitter”).
Two 3.5mm AUX cables.
Your phone or MP3 player or other audio device (with a headphone jack or a suitable adapter).
Steps:
Connect the AUX splitter to your phone MP3 player or other audio device:
If the device has a headphone jack, plug the AUX splitter directly into it.
If it doesn’t have a headphone jack (e.g., newer iPhones or Android phones), use the appropriate adapter (e.g., USB-C to 3.5mm or Lightning to 3.5mm) to connect the splitter to your phone.
Connect the speakers to the splitter:
Use two AUX cables to connect each speaker to one of the two output ports on the splitter.
Plug the other ends of the AUX cables into the AUX IN ports on each speaker.
Set up the speakers:
Turn on both speakers and set them to AUX mode.
Play music:
Open your music app on your phone and start playing music. Both speakers should now output the same audio simultaneously.
If I order two sets (4 total speaker boxes, 8 total speakers), will they work together on one device?
No, they will not work together on one device. Each set is designed to operate independently.
These speaker boxes, are they one box with left and one with right speaker channels or are they both left and right? In other words does each speaker contain both channels or is each one a channel?
A single speaker is fixed to one channel, and the control box has wiring harnesses for left and right channels.
When the speaker is connected to the left side, it becomes the left channel; when connected to the right side, it becomes the right channel.
Are these waterproof?
Yes, this is of IP67 weatherproof rating.
Could this be hooked up to a polaris ride command system?
No, these could not be hooked up to a polaris ride command system.
Can these be wired into my stock Rockford system in my 24 xp 4? I need to know is if it can be used without using Bluetooth and the transmitter I want to hook it to my existing factory head unit.
If your Rockford system host has an auxout output port, you can connect it to our speakers via an audio cable for usage.
Can you link 4 of them together?
No, you not link 4 of them together.
Could I connect them to Midnight soundbars for usage together through the Party Mode of Midnight soundbars?
No, the Party mode of Midnight soundbars could only support usage within the Midnight series soundbars, which could not be applied to other soundbars for usage together.
What are each button on the control panel for?
Please see the photo below.
Does the soundbar have aux in and out port?
Our soundbars could be controlled through panel buttons, supporting AUX in & USB playback. It does not have AUX out port.
I have to reset the settings every time I turn the soundbar off and on again next time. Is there a way to save these settings?
Unfortunately, there is no memory function available for saving the settings when the soundbar is powered off. So once the soundbar is powered off and on again, you need to reset the setting.
