Welcome to the Kemimoto Help Center

There are two versions of the remote control. Please refer to the attached pictures for the remote control function description.

One end of the switch is connected to the red wire, and the other end is connected to the positive terminal of the battery. The black wire is connected to the negative terminal of the battery.

We recommend that you use the method circled in the attached picture to connect to the positive and negative terminals of the battery.

No, it only inputs the sound, which could not be used for outputting power.

We recommend that you connect the ACC line to achieve this.

Method: Using an AUX Splitter
What You’ll Need:
A 3.5mm AUX splitter (also called a “1-to-2 audio splitter”).
Two 3.5mm AUX cables.
Your phone or MP3 player or other audio device (with a headphone jack or a suitable adapter).
Steps:
Connect the AUX splitter to your phone MP3 player or other audio device:
If the device has a headphone jack, plug the AUX splitter directly into it.
If it doesn’t have a headphone jack (e.g., newer iPhones or Android phones), use the appropriate adapter (e.g., USB-C to 3.5mm or Lightning to 3.5mm) to connect the splitter to your phone.
Connect the speakers to the splitter:
Use two AUX cables to connect each speaker to one of the two output ports on the splitter.
Plug the other ends of the AUX cables into the AUX IN ports on each speaker.
Set up the speakers:
Turn on both speakers and set them to AUX mode.
Play music:
Open your music app on your phone and start playing music. Both speakers should now output the same audio simultaneously.

Yes, RGB lights can be turned off at any time with the remote control to help you save battery power.

It cannot be modified.

No, the lights cannot be turned off permanently. You can manually turn them off when they are on.

The location of the cigarette lighter is not waterproof.
Please ensure proper waterproofing measures are taken, water leakage could cause a short circuit and damage.

As long as your phone can run the Sirius XM app, you can connect to our soundbar via Bluetooth.

Unfortunately, there is no memory function available for saving the settings when the soundbar is powered off. So once the soundbar is powered off and on again, you need to reset the setting.

There are several mounting holes on the soundbar for installation. You could choose proper mounting hole according to your needs. The brackets will be stationary after being installed on the soundbar. Here is the installation video for your reference: https://www.amazon.com/live/video/018c05abc8034444be848e377f041f9a?ref_=dp_vse_ibvc1.

No, the mounts could only be installed on the top of the soundbar.

Yes, it supports 3 control ways: wireless remote control, Bluetooth phone control, and button control.

It needs to be powered through 12V power supply, which should be connected for usage. And the lights could be turned off while playing music, just use the remote control to turn the lighting off.

We are sorry that it could not get your phone call sound to come through the speakers when making a call.
If you need to play the call to through our speaker, you need to connect the phone and speaker through the AUX cable.

You could turn off the light by pressing the SYN button on the remote control. There are 5 lighting modes (music sync, solid, fading, jump, and off).

No. The angle of the mounting brackets could not be adjusted.

Yes, the RGB lights can stay on 1 color. Use the sync button ( Top right ) on your remote control. After your led lights are in sync with the music, then press the color button on the remote and you can pick a solid color of your choice.

The RMS output power at 1% THD is 90W.