Support for X3Pro

Welcome to the Kemimoto Help Center
– your dedicated resource for all support and troubleshooting needs.

Technical Parameters

Product videos

FAQ

User Manual Download

Technical Parameters

Transducers

2*1″Tweeters(6Ω/15W)

2*6.5″Mid-bass speakers(4Ω/50W)

2*5.75″Passive Radiators

Output Power

100W RMS; 200W PEAK; 400W MAX

Voltage Range

10~18VDC

THD at Rated RMS Power <1%
Quiescent Current Draw <0.6A
Maximum Current Draw 15A
Frequency response 40Hz~20KHz
Signal-to-noise Ratio >80dB
Cable type 16AWG
Cable length 6.56Feet (2m)
Bluetooth Version V5.4
Bluetooth profile A2DP V1.3.2; AVRCP V1.6.2
Bluetooth transmitter frequency range 2402MHz-2480MHz
Bluetooth transmitter power ≤11dBm (EIRP)
Aux-in

0.6V(0.3mV-1V)(3.5mm connector)

Aux-out 0.9Vrms (3.5mm connector)
USB Drive File System FAT16,FAT32,exFAT
USB Drive Maximum 64GB

USB Supported Audio Formats

MP3/WMA/WAV/FLAC/AAC/APE

Packaging demensions

22.05″ × 15.35″ × 16.93″(L560*W390*H430 mm (+0/-5mm) )

Gross weight

36.31 lbs(16.47kg)

Operation temperature -20°C~60°C

Product videos

B1802-00102-BK X3Pro

How to install the use the speaker properly?
Please refer to the video below for more details.

FAQ

X3Pro Functions&Usage&Troubleshooting

General FAQs

Does the the speakers have aux in and out port?

Yes,the speakers has AUX IN and OUT port.

What is the Bluetooth name for connection?

As to B1802-00102-BK, the name is X3Pro.

Is there USB port for playing?

Yes, you could insert USB disk for playing music.

Does the speakers have setting memory function?

Yes. The lighting effects/EQ/volume settings can be remembered before shutdown and will be the last setting after restarting.

Could the USB port be used for output?

The USB connection port can only charge your device. The USB port can supply DC 5V 2A power.

Could the speakers be turned on through the remote control?

Yes. This product features a rocker switch connected via a lead from the amplifier. Once the rocker switch is turned on, you can use the remote control to power the device on or off.
Note: Please turn off the rocker switch during extended periods of inactivity to prevent draining your UTV’s battery.

What APP is used for control?

App name is KEMIMOTO. You could scan the code for downloading APP.

Q: Why is my remote control not working?

1. Insulation tab still in place
Your remote comes with a clear plastic tab inserted at the factory to prevent battery drain during shipping. Please pull it out from the bottom of the remote before first use.
2. Remote needs re-pairing
If the tab has been removed and the remote still has no response, it may not be properly paired with your speaker. To re-pair:
Turn on your speaker, press and hold the Power button and Volume Down button on the remote at the same time for 2 seconds
The remote and speaker will re-establish the connection

Q:How do I check if my vehicle's roof is compatible with this speaker?

Step 1 — Check your roll cage dimensions against our product specs:Parameter Required Spec
Roll cage tube diameter 1.75″ – 2.0″
Roll cage width (side-by-side) 26″ – 35.4″ (26″ minimum)
Vertical clearance below mounting point 5″
Max speaker width 12.6″

Step 2 — Check for front-center plastic trim (Can-Am Maverick X3 only)
If you plan to mount the speaker at the front or rear of a Can-Am Maverick X3, please inspect the front-center section of your roof for any factory plastic trim or cover panel.

What are the functions of each button on the remote controller?

See below photo.

support@kemimoto.com

+1 408 688 7281